In this article we’re going to look at how to create your own dog mask. We’ll cover the basics and then go on to look at some of the more advanced tips and tricks that you can use.
If you have a dog that likes to bark, and especially if your dog loves to play in the backyard and other areas of the house, you need to dog inhaler mask get them some special dog protection.
Paper Plate 3d Dog Mask DIY Materials: This is the first part of the setup which will look a little scary at first, but it’s actually quite simple. All you have to do is take a cardboard cutting board and cut the cardboard into the shape of your mask. You can’t simply cut a rectangular shape out of the cardboard, so you will need to cut around the edge of the mask so that you get something which resembles a cone. The main thing here is to be realistic with what kind of paper plate that you’re using.
Then you’ll have to wrap the cardboard around the edges of the paper plate, making sure that there is a good seal between the two pieces so you can ensure that nothing will leak when you put the mask on. Be sure that the edges are cut so that the edges aren’t sharp, as this can damage the edges of the mask.
Glue it on! The next step involves using some paint. You ought to spray the paint over the cardboard, making sure that it runs smoothly and evenly across the whole mask. You’ll want to start with one side of the mask first, so you can work your way around it before moving onto the other side. The paint needs to be slightly thicker than the cardboard, and it is best that you leave about one-third of an inch of paint on the edges so that it runs over the cardboard.
Don’t worry too much about the paint getting stuck to your mask. It’s easy to eliminate it later, and it’ll leave you with a wonderful finished mask to show off to everybody! It’s also a good idea to wipe away any excess paint once you are done, so that you don’t wind up with smudges or smears on your dog.
Then it’s time to glue the mask onto your dog’s head. First you need to make sure that you have a secure fit between the mask and your dog’s head. As soon as you’ve made sure that it’s secure, then you may start to glue the mask on the dog’s face. Take the piece of cardboard that is used for the foundation of the mask and then fold it over. Make sure that it’s quite strong and then use your hands to ensure the cardboard down in place.
Keep your hands out of the way and use tape to hold it in place as you repeat the process on the cardboard folds until you’ve got the mask snugged securely onto the surface of your dog. Don’t make the folds too big or else it could look messy. Once you’ve completed this, you can then take out the mask and attach the cardboard ears. And attach the other area of the mask onto the dog. Be sure that the ears are level and make certain it is not too short or long as this will cause some problems with the mask slipping off the dog’s face.
If you’re using a dog mask as your pet security, you’ll have to do some sanding to make sure that it’s secure on your dog. You can do this by sanding off any excess paper that may have been removed from your mask.